adFlag Blade PRO

About adFlag Blade PRO

The adFlag Blade PRO is a blade-shaped beach flag with a straight outer edge, giving a large, uninterrupted print area for your logo and message. The flag flies on a fibreglass pole that bends with the wind rather than snapping, and the set works outdoors at festivals and sports events as well as indoors at fairs and in shopping centres.

The artwork is printed straight onto the fabric with sharp detail and strong colours. Because the flag stands tall – from 260 to 520 cm depending on size – people see it above crowds and from a long way off. That makes the Blade PRO a simple way to steer visitors to your stand, mark an entrance or identify a building.

No tools are needed: join the pole sections, feed the flag into the sleeve sewn along its edge and drop the pole into the base. Packed, the set is light and compact at around 1 kg. The flag is supplied with its pole; the base is chosen to suit the ground and ordered as an accessory. The pole is reused with new flags whenever the message changes.

Features

• Blade shape with straight outer edge – maximum print area.
• Fibreglass pole: light, hard-wearing and flexible in wind.
• Direct textile print with sharp detail and strong colours.
• Four sizes from 260 to 520 cm tall.
• Tool-free assembly; the flag slides onto the pole via a sewn sleeve.
• Low weight – about 1 kg per set.
• Suitable outdoors and indoors; single-sided print.
• Reusable pole – a replacement flag can be ordered separately.

Applications

• Concerts, festivals and outdoor events.
• Fairs and campaigns in shops and shopping centres.
• Sports events – start, finish and sponsor zones.
• Beach bars, restaurant terraces and chill-out areas.
• Entrance signage and building identification.

Configurations and options

• Model: S (63 x 260 cm), M (68 x 310 cm), L (83 x 410 cm) or XL (93 x 520 cm). The figures give the flag width and the overall height including the pole.
• Configuration: «Mast + trykk» (pole + print) gives you the fibreglass pole and printed flag. «Kun trykk» (print only) is a replacement flag for a pole you already own; in the variant list these appear with dimensions only (63x260 and so on).

A base is not included and is chosen to suit the surface: a ground spike for grass and sand, a cross base or steel plate (4, 6 or 8 kg) for hard surfaces, ideally combined with a rotator so the flag turns with the wind. A transport bag for L and XL is available as an accessory. Upload your artwork after ordering and we will fit it to the chosen size before production.

Scope of delivery

• Multi-section fibreglass pole
• Printed blade flag with sewn sleeve (single-sided)

Base, rotator and transport bag are not included and are ordered separately.

Product manufactured by Adsystem.

Dimensions and weight:
Height: 260–520 cm
Width: 63–93 cm
Weight: 1 kg

• Multi-section fibreglass pole
• Printed blade flag with sewn sleeve (single-sided)